diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f2b4044..f31cabc 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -250,6 +250,8 @@
 	tegra30-beaver.dtb \
 	tegra30-cardhu.dtb \
 	tegra30-colibri.dtb \
+	tegra30-lg-p880.dtb \
+	tegra30-lg-p895.dtb \
 	tegra30-tec-ng.dtb \
 	tegra114-dalmore.dtb \
 	tegra124-apalis.dtb \
diff --git a/arch/arm/dts/tegra30-lg-p880.dts b/arch/arm/dts/tegra30-lg-p880.dts
new file mode 100644
index 0000000..81d3643
--- /dev/null
+++ b/arch/arm/dts/tegra30-lg-p880.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus 4X HD";
+	compatible = "lge,p880", "nvidia,tegra30";
+
+	aliases {
+		mmc1 = &sdmmc3; /* uSD slot */
+	};
+
+	sdmmc3: sdhci@78000400  {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+	};
+
+	panel: panel {
+		compatible = "jdi,dx12d100vm0eaa";
+
+		enable-gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+};
diff --git a/arch/arm/dts/tegra30-lg-p895.dts b/arch/arm/dts/tegra30-lg-p895.dts
new file mode 100644
index 0000000..074205d
--- /dev/null
+++ b/arch/arm/dts/tegra30-lg-p895.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus Vu";
+	compatible = "lge,p895", "nvidia,tegra30";
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+	};
+
+	panel: panel {
+		compatible = "hitachi,tx13d100vm0eaa";
+
+		reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+
+		renesas,gamma = <3>;
+		renesas,inversion;
+		renesas,contrast;
+
+		vcc-supply = <&vcc_3v0_lcd>;
+		iovcc-supply = <&iovcc_1v8_lcd>;
+
+		backlight = <&backlight>;
+	};
+
+	vcc_3v0_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v0_lcd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	iovcc_1v8_lcd: regulator-lcdvio {
+		compatible = "regulator-fixed";
+		regulator-name = "iovcc_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/dts/tegra30-lg-x3.dtsi b/arch/arm/dts/tegra30-lg-x3.dtsi
new file mode 100644
index 0000000..922e399
--- /dev/null
+++ b/arch/arm/dts/tegra30-lg-x3.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		i2c0 = &pwr_i2c;
+		i2c1 = &gen2_i2c;
+
+		mmc0 = &sdmmc4;	/* eMMC */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		spi0 = &dsi_spi;
+
+		usb0 = &micro_usb;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&bridge>;
+			};
+		};
+	};
+
+	uartd: serial@70006300 {
+		status = "okay";
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		backlight: lm3533@36 {
+			compatible = "ti,lm3533";
+			reg = <0x36>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+			default-brightness-level = <128>;
+		};
+
+		muic@44 {
+			compatible = "maxim,max14526-muic";
+			reg = <0x44>;
+
+			maxim,ap-usb;
+
+			usif-gpios = <&gpio TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>;
+			dp2t-gpios = <&gpio TEGRA_GPIO(CC, 2) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwr_i2c: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: max77663@1c {
+			compatible = "maxim,max77663";
+			reg = <0x1c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			regulators {
+				vdd_1v8_vio: sd2 {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_usd: ldo3 {
+					regulator-name = "vdd_sdmmc3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	dsi_spi: spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		bridge: bridge-spi@2 {
+			compatible = "solomon,ssd2825";
+			reg = <2>;
+
+			spi-cpol;
+			spi-cpha;
+
+			spi-max-frequency = <1000000>;
+
+			power-gpios = <&gpio TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpio TEGRA_GPIO(O, 2) GPIO_ACTIVE_HIGH>;
+
+			clocks = <&ssd2825_refclk>;
+			clock-names = "tx_clk";
+
+			panel = <&panel>;
+		};
+	};
+
+	sdmmc4: sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	micro_usb: usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	ssd2825_refclk: clock-ssd2825 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "ssd2825-refclk";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+		};
+	};
+};